Swimming pool tile

Lead Time: Twenty working days after receive your deposit.
Min Order: 1*20FCL

Application:
Thin slabs made from clays and/or other inorganic raw materials, generally used as coverings for floors and walls, usually shaped by extruding (A) or pressing (B) at room temperature but may be formed by other processes (C), then dried and subsequently fired at temperatures sufficient to develop the required properties; tiles can be glazed (GL) or unglazed (UGL) and are incombustible and unaffected by light.

Standard: GB/T 4100-2006

Technical Data

Dimensions and Surface quality
Length and width: ±0.6%
Thickness: ±5%
Straightness of sides: ±0.5%
Rectangularity: ±0.6%
Surface flatness: ±0.5%
Surface quality: A minimum of 95% of the tiles shall be free from visible defects that would impair the appearance of a major area of tiles

Physical properties
Water absorption: 6 %< E≤10%, individual maximum 11%
Breaking strength, in N: Thickness≥7.5mm, not less than 800
Modulus of rupture, in N/mm2: Minimum 18, individual minimum 16
Thermal shock resistances: Test method available

Chemical properties
Resistance to staining
Minimum Class 3
Resistance to chemicals
Resistance to low concentrations of acid and alkalis: Manufacture to state classification
Resistance to high concentrations of acids and alkalis: Test method available
Resistance to household chemicals and swimming pool salts: Minimum GB
Lead and cadmium release
Test method available